The Fender Split Shaft Potentiometer offers you a top-quality pot for tone or volume control: 3/8″ shaft, 250k with mounting nut and washer.

$6.09

You’ll want the Fender Solid Shaft Potentiometer if your pot’s noisy or nonfunctional. Replace it with the official 250K factory part.

$8.99

Replacement concentric vol/tone control on the Fender ’62 American Vintage Jazz Bass. Original CTS part.

$7.99

This Gibson potentiometer is rated 300K OHM and has a linear taper and short shaft. Intended for Gibson flattop electric guitars.

$11.99

For use with flat-top guitars as a volume or tone control.

$11.99

Volume/tone control for archtop guitars.

$11.99

Use this Gibson potentiometer with archtop guitars as a volume or tone control. 500kOhm, taper long shaft.

$11.99

Use this DiMarzio Custom Taper Split Shaft Pot for volume or tone control. Rated at 250KOhm, potentiometer comes with mounting hardware and has an integral DPDT switch.

$13.95

This DiMarzio Custom Taper Split Shaft Pot is rated at 250kOhm. DiMarzio includes mounting hardware to make replacing your potentiometer easy. Great for project guitars.

$6.50

DiMarzio Custom Taper Split Shaft Pot is rated at 500KOhm. Mounting hardware included by DiMarzio to make installing this potentiometer a snap. Get this for that project you’ve been wanting to complete.

$6.50

500 kOhm potentiometer with push/pull switch. Audio taper, knurled split-long shaft. This guitar pot works for coil-tap or phase wiring options.

$13.95

Save BIG when you buy today!

$4.99

Proline offers a huge selection of guitar parts, all made with top-quality components, for today’s most popular guitars. Whether you’re looking to replace a part or jazz up your guitar, ProLine probably has the part you’re looking for, at an affordable price.

$4.00

Save BIG when you buy today!

$4.99

Use this DiMarzio Custom Taper Split Shaft Pot for volume or tone control. Rated at 250KOhm, potentiometer comes with mounting hardware and has an integral DPDT switch.

$13.95

500 kOhm potentiometer with push/pull switch. Audio taper, knurled split-long shaft. This guitar pot works for coil-tap or phase wiring options.

$13.95

The EMG SPC or “Strat Presence Control” is a presence control knob that is often called the fat control. The original intent of the SPC was to turn the tone of a single-coil pickup into that of a dual-coil. This is accomplished by boosting the gain in a broad mid-band fashion and reducing the highs. The result is a fatter, louder tone from any single coil pickup, but you can also use the EMG SPC on a humbucker pickup to give you a high output, really fat tone that’s great for slide guitar.EMG includes an output jack and battery clip set with the SPC control knob.

$47.00

The EMG EXG Guitar Expander is an EQ knob that delivers tone flexibility to your fingertips. The frequency response of the EXG is similar to normal guitar amp equalization. The lows and highs are boosted while the midrange is dipped out. The EXG is great for creating a fuller tone that doesn’t get muddy, while keeping it clean and clear, letting your guitar stand out in the mix.EMG includes an output jack and battery clip set with the EXG Guitar Expander EQ Knob.

$47.00

Replacement 3-way pickup selector switch used on American Vintage Stratocasters and Telecasters.

$12.99

Used on many Custom Shop instruments, this switch allows you to change your Telecaster’s pickup wiring from series to parallel for increased output and a fatter tone with the flick of a switch.

$12.99

Use the Fender American Standard Strat 5-Way Pickup Selector switch to replace that worn electric guitar switch with the real deal.

$9.99

Package of 2 original Telecaster switch tips from Fender.

$5.99

Package of 2 original Telecaster top hat switch tips from Fender.

$11.99

Original Strat Black Switch Tips from Fender come in packs of 2 and will keep your axe’s hardware looking stock.

$3.99

Original Stratocaster White Switch Tips from Fender come in packs of 2 and will keep your axe looking stock.

$3.99

Available in right angle and straight versions for Gibson guitars. DiMarzio includes a knob and flat-knurled nut with the straight version and a knob and deep-knurled nut with the angled switch.

$19.95

DiMarzio builds their typical quality into this 3-Way Pickup Selector Switch for Fender Telecaster guitars. Like other DiMarzio pickup switches, it comes with installation screws and black and white knobs. Just the thing if you’ve finally worn out the pickup switch on your Tele.

$13.95

This is the multipole DiMarzio Split Coil Pickup Selector Switch for Fender guitars with 5-way switching. DiMarzio includes black and white knobs and necessary screws with this pickup selector. If you’ve been disappointed in your selector’s performance lately, or you just want a quality DiMarzio part for your project, this is the one.

$29.95

The DiMarzio Pickup Selector Switch replaces your Strat® switch that’s worn or has become unreliable. Designed to fit Fender Stratocaster guitars with 5-way pickup switches. DiMarzio throws in black and white knobs and necessary screws. Also great for guitar building projects.

$14.99

Genuine DiMarzio 4-Pole Double Throw 3-way pickup selector switch for electric guitar or bass guitar.

$29.95

The DiMarzio 2-Position DPDT Mini Switch includes mounting hardware.

$7.99

DiMarzio makes this Tele Pickup Selector Switch Knob for you in basic black. And you can get it in any color you want, as long as you want black. If your Telecaster knob is broken or missing, fade to black with this one.

$5.50

DiMarzio makes this Strat Pickup Selector Switch Cap for your Stratocaster. Choice of colors. No need to stay with those boring old caps anymore.

$1.75

DiMarzio makes this Strat Pickup Selector Switch Cap for your Stratocaster. Choice of colors. No need to stay with those boring old caps anymore.

$2.00