A TonePros bridge will stay in place and not wiggle at all (even thread play is reduced). As a result, the instrument stays in tune better, has improved sustain, and harmonics will seem to jump out of your guitar. The replacement parts mount on your vintage instrument without marring or modification, making it more playable and allowing you to put away and preserve the original guitar hardware.

$132.50

A TonePros bridge will stay in place and not wiggle at all (even thread play is reduced). As a result, the instrument stays in tune better, has improved sustain, and harmonics will seem to jump out of your guitar. The replacement parts mount on your vintage instrument without marring or modification, making it more playable and allowing you to put away and preserve the original guitar hardware.

$132.50

A TonePros bridge will stay in place and not wiggle at all (even thread play is reduced). As a result, the instrument stays in tune better, has improved sustain, and harmonics will seem to jump out of your guitar. The replacement parts mount on your vintage instrument without marring or modification, making it more playable and allowing you to put away and preserve the original guitar hardware.

$116.50

Locking Nashville-style bridge with many improvements, including intonation adjustment on the pickup side; Phillips head saddle adjustment screws, and pre-notched saddles for quick installation. The TonePros T3BT bridge comes equipped with large post, metric thread, and pre-notched saddles. Slothead post allows bridge height adjustment using a flathead screwdriver. The model fits most guitars made overseas. Direct retrofit for many USA guitars without modification.

$69.75

This is the new locking version of the standard Tune-O-Matic bridge that secures solidly to your guitar and won’t come loose or fall off when the strings are removed. Components are the same as those you will find installed on all the top new guitars direct from the factory. Fits Les Paul, SG, 335, and most USA-made guitars.

$69.75

The Advanced Vintage Replacement II is the exact replacement for the bridges found on older or vintage electric guitars originally fitted with ABR-1 style bridges. The AVR-II locking model has the complete appearance of the vintage part, but has many upgrades including more intonation range, and saddles that are “engineered in” solid, preventing “lift” against the retainer wire. Retrofit for most Vintage and reissued USA guitars without modification. Extra tight construction eliminates rattles and improves sustain.

$64.00

The guitar part secures solidly to your guitar and won’t come loose or fall off when the strings are removed. Fits Epiphone Les Paul, SG, 335, as well as most other guitars with metric threads.

$62.75

The guitar part secures solidly to your guitar and won’t come loose or fall off when the strings are removed. Fits Epiphone Les Paul, SG, 335, as well as most other guitars with metric threads.

$62.75

A true to ’50s vintage-style lightweight wraparound guitar bridge set with the TonePros matching locking studs. The locking feature on the VTNA eliminates “bridge lean” for optimum performance, and the tail is engineered specially with “INVISI-Fulcrum,” which allows strings to fulcrum on the bridge cleanly for exceptional intonation and increased harmonic overtones. Aluminum construction provides an extra resonant quality and the TonePros patented locking feature adds significantly improved sustain and tuning stability.

$132.00

Standard-style locking stop bar tailpiece fits most Tune-o-matic-style guitars. The T1ZS tailpiece features standard U.S. threads that fit most USA guitars.

$62.75

This is the TonePros wraparound bridge assembly matched with a set of locking studs. Set includes TonePros “Heighten & Tighten” adjustment tool for patented locking studs. The AVT-II is currently the only locking, piezo loadable, standard saddle, fully intonatable wraparound bridge in the world. Fits PRS guitars fitted with stud mount bridges with standard center stud spacing.TonePros locking studs are designed to lock down any wraparound bridge or stop tailpiece. These locking studs provide 100% of the contact area of the bottom flange, 100% of the contact area of the stud top, no lean, and components that are completely locked solid to the guitar body.

$159.50

This is the TonePros wraparound bridge assembly for the PRS Santana guitar matched with a set of locking studs. Set includes TonePros “Heighten & Tighten” adjustment tool for patented locking studs. The AVT-II is currently the only locking, piezo loadable, standard saddle, fully intonatable wraparound bridge in the world.TonePros locking studs are designed to lock down any wraparound bridge or stop tailpiece. These locking studs provide 100% of the contact area of the bottom flange, 100% of the contact area of the stud top, no lean, and components that are completely locked solid to the guitar body.

$129.50

This is the TonePros wraparound bridge assembly matched with a set of locking studs. Set includes TonePros “Heighten & Tighten” adjustment tool for patented locking studs. The AVT-II is currently the only locking, piezo loadable, standard saddle, fully intonatable wraparound bridge in the world. Fits PRS guitars fitted with stud mount bridges with standard center stud spacing.TonePros locking studs are designed to lock down any wraparound bridge or stop tailpiece. These locking studs provide 100% of the contact area of the bottom flange, 100% of the contact area of the stud top, no lean, and components that are completely locked solid to the guitar body.

$129.50

This is the new locking version of the common Guitar Stud (tailpiece not included) as used on wrap-around style bridge and tailpiece combinations. Attaches solidly to your guitar and won’t come loose or fall off when the strings are off. These TonePros System II components are the same that you will find installed on the top new guitars direct from the factory. The studs look identical to your stock pieces but will turn your wrap-around including Badass, Schaller 455, and Wilkinson bridge/tail combos into a solid, locking system. These new TonePros studs lock your existing Wrap-around solidly in place creating perfect intonation and singing sustain. This model fits your Epiphone as well as most other guitars with wrap-around style bridges with metric threaded inserts.

$39.95

Fender Vintage Tele Bridge Saddle set gives you the classic look and sound of the original Telecaster with brass saddles and steel screws and springs.

$29.99

The Fender Vintage Tele Bridge Plate fits Vintage Telecaster bridges only.

$12.99

Chrome ashtray Fender Tele bridge cover. For USA and Mexican vintage Telecaster bridges only.

$17.99

6 powder-coated steel bridge saddle sections with offset intonation screws for American Series Stratocasters or Telecasters. Springs and screws included.

$14.99

Here’s the Fender ’62 Reissue Strat Tremolo Bridge you can use to replace your worn Stratocaster bridge with a factory-fresh unit and put an end to whammy woes.

$99.99

The LR Baggs X-Bridge is a great sounding bridge even without the pickups, and its special piezo crystal employs 2 deflection modes to give you shimmering highs and rich lows. Its output level is comparable to that of a stock Strat and it will plug directly into most guitar amps with fine results. Its tremolo is provided with a Delrin arm bushing for silky smooth operation. Drops onto the posts of any American Standard Strat (with 2-1/16″ spacing E to E). Comes with a one-year warranty.

$129.99

Chrome-plated steel bridge with 6 fully adjustable powder-coated bridge saddles for string-through-body Telecasters. Mounting hardware included.

$39.99

Refurbish your Strat with genuine Fender factory parts.

$29.99

The Graph Tech Ghost LB-63 Bridge is a drop-in replacement for Floyd Rose Original and licensed bridges. The bridge comes loaded with Ghost piezo crystals encased in String Saver Saddles.Ghost By encapsulating custom-engineered piezo crystals in a set of String Saver Saddles, Graph Tech Ghost Saddle Pickups use a natural compression that is very similar to an acoustic guitar. You can play as hard as you want without overloading the input channel or experiencing the dreaded piezo “quack.” The Ghost Pickup system provides the benefits of longer string life, improved sustain, and full-bodied tone.The Graph Tech Ghost LB-63 Bridge and saddles are made of steel. The saddles have piezo inserts made from patented Graph Tech String Saver material. The Ghost LB-63 bridge fits most guitars routed for Floyd Rose Original and Licensed bridges.

$289.99

The Graph Tech Ghost LB-63 Bridge is a drop-in replacement for Floyd Rose Original and licensed bridges. The bridge comes loaded with Ghost piezo crystals encased in String Saver Saddles.Ghost By encapsulating custom-engineered piezo crystals in a set of String Saver Saddles, Graph Tech Ghost Saddle Pickups use a natural compression that is very similar to an acoustic guitar. You can play as hard as you want without overloading the input channel or experiencing the dreaded piezo “quack.” The Ghost Pickup system provides the benefits of longer string life, improved sustain, and full-bodied tone.The Graph Tech Ghost LB-63 Bridge and saddles are made of steel. The saddles have piezo inserts made from patented Graph Tech String Saver material. The Ghost LB-63 bridge fits most guitars routed for Floyd Rose Original and Licensed bridges.

$289.99

The Graph Tech Ghost LB-63 Bridge is a drop-in replacement for Floyd Rose Original and licensed bridges. The bridge comes loaded with Ghost piezo crystals encased in String Saver Saddles.Ghost By encapsulating custom-engineered piezo crystals in a set of String Saver Saddles, Graph Tech Ghost Saddle Pickups use a natural compression that is very similar to an acoustic guitar. You can play as hard as you want without overloading the input channel or experiencing the dreaded piezo “quack.” The Ghost Pickup system provides the benefits of longer string life, improved sustain, and full-bodied tone.The Graph Tech Ghost LB-63 Bridge and saddles are made of steel. The saddles have piezo inserts made from patented Graph Tech String Saver material. The Ghost LB-63 bridge fits most guitars routed for Floyd Rose Original and Licensed bridges.

$259.99

String Saver Classic Floyd Rose Saddles are superior drop-in replacement saddles for Floyd Rose Original and licensed bridges.How do they work? A string resting on a metal saddle binds and locks the string in place. As the string vibrates, it stresses the string on a very specific point producing metal fatigue and then string breakage. Each String Saver saddle is impregnated with Teflon, the slipperiest substance on earth. The Teflon in String Savers eases the grip between the saddle and string, spreading the stress over a greater portion of the string, just enough to drastically reduce string breakage. Teflon is 500% more slippery than graphite and is impregnated throughout the String Saver material, so its lubricating properties will never wear out. For string breakage reduction the difference is dramatic. Strings that last and last, no matter how hard you play&hellipGraph Tech guarantees it!What do they sound like? Metal saddles have a pronounced 2kHz treble spike that dominates the tonal spectrum. String Saver Originals have a more balanced tone, with highs, mids and big open lows. You will also notice an increase in sustain by up to 25% over brass saddles and 15% over steel.

$89.99

Ghost loaded String Saver Classic Floyd Rose saddles are a drop-in replacement for Floyd Rose Original and licensed bridges. These guitar saddles come loaded with ghost acoustic pickups encased in Graph Tech’s own String Saver pickup inserts, loaded into metal saddles. These saddles are just one component of Graph Tech’s ghost modular pickup system. (You may want to order the Hexpander MIDI Interface, the Acousti-Phonic, or both together in one of Graph Tech’s ghost Kits – SOLD SEPARATELY) The Ghost System’s String Saver Classic saddles for Floyd Rose let you get acoustic tone from your Floyd Rose equipped electric guitar when installed with the Acousti-Phonic, or use it as a MIDI controller…

$189.99

Ghost loaded String Saver Classic Floyd Rose saddles are a drop-in replacement for Floyd Rose Original and licensed bridges. These guitar saddles come loaded with ghost acoustic pickups encased in Graph Tech’s own String Saver pickup inserts, loaded into metal saddles. These saddles are just one component of Graph Tech’s ghost modular pickup system. (You may want to order the Hexpander MIDI Interface, the Acousti-Phonic, or both together in one of Graph Tech’s ghost Kits – SOLD SEPARATELY) The ghost saddle pickups have a natural compression effect, so you can play as hard as you want without overloading the input channel or experiencing the dreaded piezo “quack”….

$179.99

The Ebony Shadow SH 980 Piezo Pickup for archtop guitars features a 1/4″ (6.3 mm) output socket. Also includes a cable holder and double-sided bonding material.

$159.20

The Fishman M-200 is an archtop mandolin bridge pickup with a piezo-ceramic pickup element embedded in an adjustable ebony replacement bridge. Fishman ncludes a Carpenter-style 1/4″ output jack that mounts on the side of your mandolin. Fishman recommends an impedance matching preamp (not required), and professional installation.

$209.95